Skip to content
ysrdevsPublic

About

A check-up for your Mac in the menu bar: processor, graphics, memory, storage, thermals, network, USB and power, with a timeline, an app uninstaller and an assistant that explains what is going on

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

3 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Dotmeter icon

Dotmeter

A check-up for your Mac. Dotmeter lives in the menu bar for the quick look and opens a window for the full picture: what is using the processor, graphics, memory, disk, network and power right now, how hot the Mac is running, what is plugged into every port, and what happened earlier today.

The Dotmeter window on its Dashboard

Every screenshot here uses made-up apps, addresses and devices. The app has a demo mode for each area, so nothing personal ends up in a picture.

Features

In the menu bar

Any area can sit in the menu bar as its own item, in any combination. Each item draws a small live graph and its figure, and opens a panel about that area when clicked. Click the item again to close it.

Menu bar items in their three styles

  • Processor and Graphics show load. Memory and Storage show used over free. Thermals shows the hottest sensor in °C. Network shows upload over download. USB shows one column per port. Power shows watts.
  • Three styles per item: graph and value, icon and value, graph only.
  • An item changes colour when it needs attention: memory under pressure, the Mac running hot, the disk nearly full, the network offline, a USB connection running slower than it could.

The Dashboard panel The Processor panel The Network panel

Dashboard

One card per area. Drag a card onto another to move it, or right-click a card for Move to the Top, Up, Down and Bottom, so what matters to you is on top. The menu bar panel follows the same order.

Processor, Graphics and Memory

Who is using each, as one bar split by app, with every core, five minutes of history, and a table you can expand to see an app's processes. An app that is working hard can be quit from its row.

Processor page Memory page

Storage

Scan the disk to see what it is made of: apps, developer files, photos, movies, documents, music, system data, caches and the Trash. Shared storage is counted once, so the categories add up to what the disk reports.

  • Clear caches or empty the Trash, or remove one item at a time.
  • Uninstall an app with what it left behind: its settings, caches, support files and background items. The row tells you what will go before you confirm. A search finds any installed app, and you can drop an app onto the page.
  • Apps owned by the system are removed by a small helper that macOS asks you to allow once.

Storage page

An app asking to be uninstalled, with what it left behind

Thermals and Power

Every temperature sensor and fan, with the hottest readings charted against load. Power shows what the whole Mac draws and which apps the energy goes to, with the cost over a day, a month or a year if you enter your price per kWh. On a laptop there is a Battery area as well.

Thermals page Power page

Network

Traffic by app, the route from this Mac to the router and the internet, the Wi-Fi or wired link, latency and loss, and a speed test you start yourself.

  • Local and external IP, each copied with one click, with the country your traffic leaves from.
  • Open ports: which apps are waiting for connections, split into those other devices can reach and those that only answer to this Mac.

Network page

Open ports, by who can reach them

USB

Every port and what is on it. For each connection Dotmeter works out what is setting the speed: the Mac's port, the cable or the device. It reads the chip in the cable's plug (speed, wattage, length, maker), shows Thunderbolt lanes, displays, chargers and the tree of devices behind a hub, and says so in plain words when a cable is holding a drive or a charger back.

USB page

Timeline

One line a minute is kept for a week: load, heat, fan speed, traffic and power. Events are marked on it, such as the Mac running hot, an app holding several cores, memory pressure, the disk filling up, the connection dropping, or a slow USB connection. Each event can also send a notification.

Timeline page

Ask Claude or GPT

Ask what is going on with your Mac and get an answer based on a snapshot of the readings: what is busy, whether it is normal, and what to do about it. Every area also has an Explain button. You bring your own API key, from Anthropic or OpenAI, and it is stored in the Keychain.

An answer about the Mac's current state

Also

  • Login Items: what starts with your Mac, with a way to remove each.
  • Graphics: load, memory and per-app share of the graphics cores.
  • A window that remembers where you left it, and a Dock icon only while the window is open.

Requirements

  • macOS 14 or later.
  • Apple silicon or Intel. It was built and tested on Apple silicon; the Intel build runs under Rosetta in testing and has not been run on an Intel Mac.

Install

Download the latest Dotmeter-<version>.dmg from the Releases page, open it and drag Dotmeter onto Applications. The app is signed and notarized by Apple.

The install window

Build from source

Requires Xcode 15 or later.

Scripts/build.sh release --install --run

This builds the Swift package, assembles Dotmeter.app, signs it with your Apple Development identity if you have one, copies it to /Applications and launches it.

To make a notarized disk image for other Macs:

Scripts/package.sh

That needs a Developer ID Application certificate and a notarytool keychain profile. The details are in docs/NOTES.md.

Setting up the assistant

Open Settings, choose Claude or GPT under Assistant, and paste your API key. Each provider keeps its own key, so you can switch between them. Without a key everything else works as normal.

What leaves your Mac

Dotmeter reads your Mac locally. It only uses the network for these, and each can be switched off or simply not used:

  • Assistant requests go to api.anthropic.com or api.openai.com, only when you ask.
  • Latency echoes go to your router and to 1.1.1.1 while the Network area is open.
  • External IP is asked of 1.1.1.1 when the Network area or panel opens.
  • Speed test uses Apple's networkQuality, only when you press the button.

There are no accounts, analytics or tracking.

Permissions macOS may ask for

  • Files and folders, the first time you scan the disk. Only sizes are read, never contents.
  • Full Disk Access is optional and lets the scan measure Photos and the Trash.
  • Notifications, if you switch on any alert.
  • Local network, for the echo to your router.
  • Login Items, once, to allow the uninstall helper.

Project layout

Sources/Dotmeter         The app: collectors, models, pages, panels and the design kit
Sources/DotmeterShared   What the app and its helper share
Sources/DotmeterHelper   The uninstall helper
Sources/CDotmeter        A small C shim for system calls
Scripts                  Build, package and the install window
Resources                Info.plist, icon, entitlements
docs                     Screenshots and technical notes

More detail on how each reading is taken, performance, the uninstaller's rules and the debug switches is in docs/NOTES.md.

License

Dotmeter is open source under the MIT License.

About

A check-up for your Mac in the menu bar: processor, graphics, memory, storage, thermals, network, USB and power, with a timeline, an app uninstaller and an assistant that explains what is going on

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages