Skip to content

Latest commit

 

History

History
313 lines (224 loc) · 20.5 KB

using-openstack-cloud-controller-manager.md

File metadata and controls

313 lines (224 loc) · 20.5 KB

Table of Contents generated with DocToc

Get started with external openstack-cloud-controller-manager in Kubernetes

External cloud providers were introduced as an Alpha feature in Kubernetes release 1.6. openstack-cloud-controller-manager is the implementation of external cloud provider for OpenStack clusters. An external cloud provider is a kubernetes controller that runs cloud provider-specific loops required for the functioning of kubernetes. These loops were originally a part of the kube-controller-manager, but they were tightly coupling the kube-controller-manager to cloud-provider specific code. In order to free the kubernetes project of this dependency, the cloud-controller-manager was introduced.

cloud-controller-manager allows cloud vendors and kubernetes core to evolve independent of each other. In prior releases, the core Kubernetes code was dependent upon cloud provider-specific code for functionality. In future releases, code specific to cloud vendors should be maintained by the cloud vendor themselves, and linked to cloud-controller-manager while running Kubernetes.

For more information about cloud-controller-manager, please see:

NOTE: Now, the openstack-cloud-controller-manager implementation is based on OpenStack Octavia, Neutron-LBaaS has been deprecated in OpenStack since Queens release and no longer maintained in openstack-cloud-controller-manager. So make sure to use Octavia if upgrade to the latest openstack-cloud-controller-manager docker image.

Deploy a Kubernetes cluster with openstack-cloud-controller-manager using kubeadm

The following guide has been tested to install Kubernetes v1.17 on Ubuntu 18.04.

Prerequisites

  • docker, kubeadm, kubelet and kubectl has been installed.

Steps

  • Create the kubeadm config file according to manifests/controller-manager/kubeadm.conf

  • Bootstrap the cluster, make sure to install the CNI network plugin as well.

    kubeadm init --config kubeadm.conf

  • Bootstrap worker nodes. You need to set --cloud-provider=external for kubelet service before running kubeadm join.

  • Create a secret containing the cloud configuration. You can find an example config file in manifests/controller-manager/cloud-config. If you have certs you need put the cert file into folder /etc/ssl/certs/ and update ca-file in the configuration file, refer to ca-file option here for further information. After that, Save the configuration to a file named cloud.conf, then:

    kubectl create secret -n kube-system generic cloud-config --from-file=cloud.conf

  • Create RBAC resources and openstack-cloud-controller-manager deamonset.

    kubectl apply -f https://raw.githubusercontent.com/kubernetes/cloud-provider-openstack/master/manifests/controller-manager/cloud-controller-manager-roles.yaml
kubectl apply -f https://raw.githubusercontent.com/kubernetes/cloud-provider-openstack/master/manifests/controller-manager/cloud-controller-manager-role-bindings.yaml
kubectl apply -f https://raw.githubusercontent.com/kubernetes/cloud-provider-openstack/master/manifests/controller-manager/openstack-cloud-controller-manager-ds.yaml

  • Waiting for all the pods in kube-system namespace up and running.

Migrating from in-tree openstack cloud provider to external openstack-cloud-controller-manager

If you are already running a Kubernetes cluster (installed by kubeadm) but using in-tree openstack cloud provider, switching to openstack-cloud-controller-manager is easy by following the steps in the demo below.

asciicast

Also, checkout the guide on Migrate to CCM

Config openstack-cloud-controller-manager

Implementation of openstack-cloud-controller-manager relies on several OpenStack services.

Service API Version(s) Deprecated Required
Identity (Keystone) v3 No Yes
Compute (Nova) v2 No Yes
Load Balancing (Neutron-LBaaS) v1, v2 Yes No
Load Balancing (Octavia) v2 No Yes
Key Manager (Barbican) v1 No No

NOTE:

  • Block Storage is not needed for openstack-cloud-controller-manager in favor of cinder-csi-plugin.
  • Barbican is required to support creating Service of LoadBalancer type with TLS termination.

Global

The options in Global section are used for openstack-cloud-controller-manager authentication with OpenStack Keystone, they are similar to the global options when using openstack CLI, see more information in openstack man page.

  • auth-url Required. Keystone service URL, e.g. http://128.110.154.166/identity

  • os-endpoint-type Optional. Specify which type of endpoint to use from the service catalog. If not set, public endpoints are used.

  • ca-file Optional. CA certificate bundle file for communication with Keystone service, this is required when using the https protocol in the Keystone service URL.

  • cert-file Optional. Client certificate path used for the client TLS authentication.

  • key-file Optional. Client private key path used for the client TLS authentication.

  • username Keystone user name. If you are using Keystone application credential, this option is not required.

  • password Keystone user password. If you are using Keystone application credential, this option is not required.

  • region Required. Keystone region name.

  • domain-id Keystone user domain ID. If you are using Keystone application credential, this option is not required.

  • domain-name Keystone user domain name, not required if domain-id is set.

  • tenant-id Keystone project ID. When using Keystone V3 - which changed the identifier tenant to project - the tenant-id value is automatically mapped to the project construct in the API.

    tenant-id is not needed when using trust-id or Keystone application credential

  • tenant-name Keystone project name, not required if tenant-id is set.

  • tenant-domain-id Keystone project domain ID.

  • tenant-domain-name Keystone project domain name.

  • user-domain-id Keystone user domain ID.

  • user-domain-name Keystone user domain name.

  • trust-id Keystone trust ID. A trust represents a user's (the trustor) authorization to delegate roles to another user (the trustee), and optionally allow the trustee to impersonate the trustor. Available trusts are found under the /v3/OS-TRUST/trusts endpoint of the Keystone API.

  • trustee-id Keystone trustee user ID.

  • trustee-password Keystone trustee user password.

  • use-clouds Set this option to true to get authorization credentials from a clouds.yaml file. Options explicitly set in this section are prioritized over values read from clouds.yaml, the file path can be set in clouds-file option. Otherwise, the following order is applied:

    1. A file path stored in the environment variable OS_CLIENT_CONFIG_FILE
    2. The directory pkg/openstack
    3. The directory ~/.config/openstack
    4. The directory /etc/openstack

  • clouds-file File path of a clouds.yaml file, used together with use-clouds=true.

  • cloud Used to specify which named cloud in the clouds.yaml file that you want to use, used together with use-clouds=true.

  • application-credential-id The ID of an application credential to authenticate with. An application-credential-secret has to be set along with this parameter.

  • application-credential-name The name of an application credential to authenticate with. If application-credential-id is not set, the user name and domain need to be set.

  • application-credential-secret The secret of an application credential to authenticate with.

  • tls-insecure If set to true, then the server’s certificate will not be verified. Default is false.

Networking

  • ipv6-support-disabled Indicates whether or not IPv6 is supported. Default: false

  • public-network-name The name of Neutron external network. openstack-cloud-controller-manager uses this option when getting the external IP of the Kubernetes node. Can be specified multiple times. Specified network names will be ORed. Default: ""

  • internal-network-name The name of Neutron internal network. openstack-cloud-controller-manager uses this option when getting the internal IP of the Kubernetes node, this is useful if the node has multiple interfaces. Can be specified multiple times. Specified network names will be ORed. Default: ""

  • address-sort-order This configuration key influences the way the provider reports the node addresses to the Kubernetes node resource. The default order depends on the hard-coded order the provider queries the addresses and what the cloud returns, which does not guarantee a specific order.

    To override this behavior it is possible to specify a comma separated list of CIDRs. Essentially, this will sort and group all addresses matching a CIDR in a prioritized manner, where the first item having a higher priority than the last. All non-matching addresses will remain in the same order they are already in.

    For example, this option can be useful when having multiple or dual-stack interfaces attached to a node and needing a user-controlled, deterministic way of sorting the addresses. Default: ""

Load Balancer

Although the openstack-cloud-controller-manager was initially implemented with Neutron-LBaaS support, Octavia is recommended now because Neutron-LBaaS has been deprecated since Queens OpenStack release cycle and no longer accepted new feature enhancements. As a result, lots of advanced features in openstack-cloud-controller-manager rely on Octavia, even the CI is running based on Octavia enabled OpenStack environment. Functionalities are not guaranteed if using Neutron-LBaaS.

  • enabled Whether or not to enable the LoadBalancer type of Services integration at all. Default: true

  • use-octavia Whether or not to use Octavia for LoadBalancer type of Service implementation instead of using Neutron-LBaaS. Default: true

  • floating-network-id Optional. The external network used to create floating IP for the load balancer VIP. If there are multiple external networks in the cloud, either this option must be set or user must specify loadbalancer.openstack.org/floating-network-id in the Service annotation.

  • floating-subnet-id Optional. The external network subnet used to create floating IP for the load balancer VIP. Can be overridden by the Service annotation loadbalancer.openstack.org/floating-subnet-id.

  • floating-subnet Optional. A name pattern (glob or regexp if starting with ~) for the external network subnet used to create floating IP for the load balancer VIP. Can be overridden by the Service annotation loadbalancer.openstack.org/floating-subnet. If multiple subnets match the first one with still available IPs is used.

  • floating-subnet-tags Optional. Tags for the external network subnet used to create floating IP for the load balancer VIP. Can be overridden by the Service annotation loadbalancer.openstack.org/floating-subnet-tags. If multiple subnets match the first one with still available IPs is used.

  • lb-method The load balancing algorithm used to create the load balancer pool. The value can be ROUND_ROBIN, LEAST_CONNECTIONS, or SOURCE_IP. Default: ROUND_ROBIN

  • lb-provider Optional. Used to specify the provider of the load balancer, e.g. "amphora" or "octavia". Only "amphora" or "octavia" provider are officially tested, other provider will cause a warning log.

  • lb-version Optional. If specified, only "v2" is supported.

  • subnet-id ID of the Neutron subnet on which to create load balancer VIP. This ID is also used to create pool members, if member-subnet-id is not set.

  • member-subnet-id ID of the Neutron network on which to create the members of the load balancer. The load balancer gets another network port on this subnet. Defaults to subnet-id if not set.

  • network-id ID of the Neutron network on which to create load balancer VIP, not needed if subnet-id is set.

  • manage-security-groups If the Neutron security groups should be managed separately. Default: false

  • create-monitor Indicates whether or not to create a health monitor for the service load balancer. A health monitor required for services that declare externalTrafficPolicy: Local. Default: false

  • monitor-delay The time, in seconds, between sending probes to members of the load balancer. Default: 5

  • monitor-max-retries The number of successful checks before changing the operating status of the load balancer member to ONLINE. A valid value is from 1 to 10. Default: 1

  • monitor-timeout The maximum time, in seconds, that a monitor waits to connect backend before it times out. Default: 3

  • internal-lb Determines whether or not to create an internal load balancer (no floating IP) by default. Default: false.

  • cascade-delete Determines whether or not to perform cascade deletion of load balancers. Default: true.

  • flavor-id The id of the loadbalancer flavor to use. Uses octavia default if not set.

  • availability-zone The name of the loadbalancer availability zone to use. It is applicable if use-octavia is set to True and requires Octavia API version 2.14 or later (Ussuri release). The Octavia availability zone capabilities will not be used if it is not set. The parameter will be ignored if the Octavia version doesn't support availability zones yet.

  • LoadBalancerClass "ClassName" This is a config section including a set of config options. User can choose the ClassName by specifying the Service annotation loadbalancer.openstack.org/class. The following options are supported:

    • floating-network-id. The same with floating-network-id option above.
    • floating-subnet-id. The same with floating-subnet-id option above.
    • floating-subnet. The same with floating-subnet option above.
    • floating-subnet-tags. The same with floating-subnet-tags option above.
    • network-id. The same with network-id option above.
    • subnet-id. The same with subnet-id option above.
    • member-subnet-id. The same with member-subnet-id option above.

  • enable-ingress-hostname

    Used with proxy protocol (set by annotation loadbalancer.openstack.org/proxy-protocol: "true") by adding a dns suffix (nip.io) to the load balancer IP address. Default false.

    This option is currently a workaround for the issue kubernetes/ingress-nginx#3996, should be removed or refactored after the Kubernetes KEP-1860 is implemented.

  • ingress-hostname-suffix

    The dns suffix to the load balancer IP address when using proxy protocol. Default nip.io

    This option is currently a workaround for the issue kubernetes/ingress-nginx#3996, should be removed or refactored after the Kubernetes KEP-1860 is implemented.

  • default-tls-container-ref Reference to a tls container. This option works with Octavia, when this option is set then the cloud provider will create an Octavia Listener of type TERMINATED_HTTPS for a TLS Terminated loadbalancer.

    Format for tls container ref: https://{keymanager_host}/v1/containers/{uuid} Check container-store parameter if you want to disable validation.

  • container-store Optional. Used to specify the store of the tls-container-ref, e.g. "barbican" or "external" - other store will cause a warning log. Default value - barbican - existence of tls container ref would always be performed.

    If set to external format for tls container ref will not be validated.

  • max-shared-lb The maximum number of Services that share a load balancer. Default: 2

NOTE:

  • When using ovn provider service has limited scope - create_monitor is not supported and only supported lb-method is SOURCE_IP.

Metadata

  • search-order This configuration key influences the way that the provider retrieves metadata relating to the instance(s) in which it runs. The default value of configDrive,metadataService results in the provider retrieving metadata relating to the instance from the config drive first if available and then the metadata service. Alternative values are:

    • configDrive - Only retrieve instance metadata from the configuration drive.
    • metadataService - Only retrieve instance metadata from the metadata service.
    • metadataService,configDrive - Retrieve instance metadata from the metadata service first if available, then the configuration drive.

    Not all OpenStack clouds provide both configuration drive and metadata service though and only one or the other may be available which is why the default is to check both. Especially, the metadata on the config drive may grow stale over time, whereas the metadata service always provides the most up to date data.

Multi region support (alpha)

  • environment variable OS_CCM_REGIONAL is set to true - allow CCM to set ProviderID with region name ${ProviderName}://${REGION}/${instance-id}. Default: false.

Exposing applications using services of LoadBalancer type

Refer to Exposing applications using services of LoadBalancer type

Metrics

Refer to Metrics for openstack-cloud-controller-manager

Limitation

OpenStack availability zone must not contain blank

topology.kubernetes.io/zone is used to label node and its value comes from availability zone of the node, according to label spec it does not support blank (' ') but OpenStack availability zone supports blank. So your OpenStack availability zone must not contain blank otherwise it will lead to node that belongs to this availability zone register failure, see #1379 for further information.