- Device Types
- UUID Update Notes
- Air Purifier BLE open API
- Blind Tilt BLE open API
- Bot BLE open API
- Color Bulb BLE open API
- Contact Sensor BLE open API
- Curtain BLE open API
- Curtain 3 BLE open API
- Humidifier BLE open API
- Keypad BLE open API
- LED Strip Light BLE open API
- Meter BLE open API
- Motion Sensor BLE open API
- Plug Mini BLE open API
- Lock BLE open API
| Product | Device Type |
|---|---|
| Bot | H (0x48) |
| Meter | T (0x54), t (0x74) |
| Meter Plus | i (0x69), I (0x49) |
| Meter Pro | 4 (0x34), 0x14 |
| Meter Pro CO2 | 5 (0x35), 0x15 |
| Indoor/Outdoor Thermo-Hygrometer | w (0x77), W (0x57) |
| Humidifier | e (0x65), E (0x45) |
| Curtain | c (0x63), C (0x43) |
| Curtain 3 | { (0x7B), [ (0x5B) |
| Motion Sensor | s (0x73), S (0x53) |
| Contact Sensor | d (0x64), D (0x44) |
| Color Bulb | u (0x75), U (0x55) |
| LED Strip Light | r (0x72), R (0x52) |
| Ceiling Light | q (0x71), Q (0x51) |
| Ceiling Light Pro | n (0x6E), N (0x4E) |
| Smart Lock | o (0x6F), O (0x4F) |
| Plug Mini (US) | g (0x67), G (0x47) |
| Plug Mini (JP) | j (0x6A), J (0x4A) |
| Hub 2 | v (0x76), V (0x56) |
| Evaporative Humidifier | # (0x23), 0x03 |
| Smart Lock Pro | $ (0x24), 0x04 |
| Blind Tilt | x (0x78), X (0x58) |
| Water Leak Detector | & (0x26), 0x06 |
| Keypad | y (0x79), Y (0x59) |
| Relay Switch 1PM | < (0x3C), 0x1C |
| Relay Switch 1 | ; (0x3B), 0x1B |
| Remote | b (0x62), B (0x42) |
| Universal Remote | 0x07, ' (0x27) |
| Roller Shade | , (0x2C), 0x0C |
| HubMini Matter | % (0x25), 0x05 |
| Circulator Fan | ~ (0x7E), ^ (0x5E) |
| Robot Vacuum K20+ Pro | . (0x2E), 0x0F |
| Floor Cleaning Robot S10 | z (0x7A), Z (0x5A) |
| Robot Vacuum K10+ Pro Combo | 3 (0x33), 0x13 |
| Mini Robot Vacuum K10+ | } (0x7D), ] (0x5D) |
| Mini Robot Vacuum K10+ Pro | ( (0x28), 0x08 |
| Air Purifier (US) | * (0x2A), 0x0A |
| Air Purifier (JP) | + (0x2B), 0x0B |
| Air Purifier Table (US) | 7 (0x37), 0x17 |
| Air Purifier Table (JP) | 8 (0x38), 0x18 |
| Smart Lock Lite | - (0x2D), 0x0D |
| Garage Door Opener | > (0x3E), 0x1E |
| Relay Switch 2PM | = (0x3D), 0x1D |
| Plug Mini (EU) | ? (0x3F), 0x1F |
Products that share a protocol still report their own Device Type, so
clients should identify the product from the Device Type rather than
treating, for example, Curtain 3 as Curtain or Plug Mini (JP) as
Plug Mini (US). Where several values are listed, each identifies the same
product. Values are Byte 0 of the service data with Bit 7 cleared, as
listed in pySwitchbot's SUPPORTED_TYPES.
Newer products have no single-byte Device Type (Byte 0 of their service data, usually 0x00, is
not in the table above). They are identified by a 4-byte Product ID at the end of the service
data: read the last 4 bytes; if they are not a known Product ID, read the 4 bytes before the last
byte. Most products have a 0x00… and a 0x01… form. These are the Product IDs in pySwitchbot's
SUPPORTED_TYPES (_find_model_from_service_data_suffix):
| Device Type | Product ID |
|---|---|
| Art Frame | 0x00113e10, 0x01113e10 |
| Candle Warmer Lamp | 0x001122b8, 0x011122b8 |
| Circulator Fan Pro | 0x0011b340, 0x0111b340 |
| Climate Panel | 0x0010f3d8, 0x0110f3d8 |
| Floor Lamp | 0x0010d0b0, 0x0110d0b0 |
| Hub3 | 0x0010b940, 0x0110b940 |
| Hub4 | 0x00128248, 0x01128248 |
| K11+ Vacuum | 0x0010fba8, 0x0110fba8 |
| Keypad Vision | 0x00110378, 0x01110378 |
| Keypad Vision Pro | 0x00115198, 0x01115198 |
| Lock Nano | 0x00122488, 0x01122488 |
| Lock Pro Wifi | 0x0010ff90, 0x0110ff90 |
| Lock Ultra | 0x0010a5b8, 0x0110a5b8 |
| Lock Ultra Max | 0x00119fb8, 0x01119fb8 |
| Lock Vision | 0x00116908, 0x01116908 |
| Lock Vision Pro | 0x00116909, 0x01116909 |
| Outdoor Plug (EU) | 0x001218d0 |
| Permanent Outdoor Light | 0x0010d0b7, 0x0110d0b7 |
| Plug Mini (IT) | 0x001243c8, 0x011243c8 |
| Presence Sensor | 0x0010ccc8, 0x0110ccc8 |
| RGBIC Neon Rope Light | 0x0010d0b6, 0x0110d0b6 |
| RGBIC Neon Wire Rope Light | 0x0010d0b5, 0x0110d0b5 |
| RGBICWW Ceiling Light | 0x0011bb10, 0x0111bb10 |
| RGBICWW Floor Lamp | 0x0010d0b4, 0x0110d0b4 |
| RGBICWW Light Bars | 0x0011bef8, 0x0111bef8 |
| RGBICWW Strip Light | 0x0010d0b3, 0x0110d0b3 |
| S20 Vacuum | 0x0010e050, 0x0110e050 |
| Smart Thermostat Radiator | 0x00113640, 0x01113640 |
| Standing Fan | 0x00110760, 0x01110760 |
| Strip Light 3 | 0x0010d0b1, 0x0110d0b1 |
| UWB Lock | 0x00121100, 0x01121100 |
| Weather Station | 0x001053b0, 0x011053b0 |
The device type is in the service data of SCAN_RSP.
| Service data | ||
|---|---|---|
| Byte: 0 | Enc type | Bit[7] NC |
| Byte: 0 | Dev Type | Bit [6:0] – Device Type |
From Bot V6.4, Curtain V4.6, Meter V2.7,
Company ID(ADV_IND-Manufacture Data) modified from0x0059to0x0969.Service UUID(SCAN_RSP-Service Data) modified from0x000dto0xfd3d.- Complete list of 128-bit UUIDs (
SCAN_RSP) has been removed.