LoopKit · marionbarker · Jul 3, 2026 · Jun 20, 2026 · Jun 21, 2026 · Jun 21, 2026
diff --git a/docs/build/cgm.md b/docs/build/cgm.md
@@ -44,9 +44,9 @@ If the *Dexcom* app is on the same device as the *Loop* app, your system can fun
 
 ## *Dexcom* G7 and ONE+ CGM
 
-The *Dexcom* G7 and ONE+ CGM transmits data directly to the *Dexcom* app on your iPhone via Bluetooth.
+The *Dexcom* G7 (10-day and 15-day) and ONE+ CGM transmits data directly to the *Dexcom* app on your iPhone via Bluetooth.
 
-The *Dexcom* ONE+, available in some countries, acts just like the G7 as far as the *Loop* app is concerned. 
+The *Dexcom* ONE+, available in some countries, acts just like the G7 as far as the *Loop* app is concerned.
 
 ## *Libre* CGM
 
@@ -57,6 +57,7 @@ With Loop 3.4 and newer versions, some *Libre* CGM are supported.
 * These *Libre* CGM are not supported within the *Loop* app
     * American (Canada, US, South American) *Libre* 2
     * *Libre* 3
+* Coming soon *Libre* 3/3+ support is available in [next-dev branch](../version/development.md#updates-in-dev) for experienced users
 * See [CGM Customization](../faqs/cgm-faqs.md#cgm-customization){: target="_blank" }
 
 ## *Eversense* E3 and 365 CGM

diff --git a/docs/build/phone.md b/docs/build/phone.md
@@ -37,7 +37,7 @@ These phones require *iOS* 26 and `Loop version 3.8.x` or newer
 
 - iPhone 17, all variants except 17e
     - iPhone 17e models are compatible but **not recommended for use with Omnipod DASH**
-    * See [Atlas or InPlay DASH pod](../faqs/omnipod-faqs.md#atlas-or-inplay-dash-pods){: target="_blank" } warning
+    * See [Keep Alive: Atlas or InPlay DASH pod](../faqs/omnipod-faqs.md#keep-alive-atlas-or-inplay-dash-pods){: target="_blank" } warning
 
 !!! important "iOS 26 requires `Loop v3.8.2` or newer"
     Any iPhone 17 must run iOS 26. You must install `Loop v3.8.2` or newer before updating to iOS 26.  `Loop v3.7.x` and earlier do not to support iOS 26.
@@ -47,9 +47,9 @@ These phones require *iOS* 26 and `Loop version 3.8.x` or newer
 These phones require *iOS* 18 and are compatible with *iOS* 26.
 
 - iPhone 16 models are compatible but **not recommended for use with Omnipod DASH**
-    * See [Atlas or InPlay DASH pod](../faqs/omnipod-faqs.md#atlas-or-inplay-dash-pods){: target="_blank" } warning
+    * See [Keep Alive: Atlas or InPlay DASH pod](../faqs/omnipod-faqs.md#keep-alive-atlas-or-inplay-dash-pods){: target="_blank" } warning
 
-These phones are compatible with *iOS* 17, 18 and 26
+These phones are compatible with *iOS* 17, 18 and 26. The next version of the *Loop* app will require *iOS* 18 as a minimum.
 
 - iPhone 15, all variants
 - iPhone 14, all variants
@@ -68,7 +68,7 @@ These phones are compatible with *iOS* 17, 18 and 26
 
 ### Older Devices
 
-These phones are limited to *iOS* 16. No longer supported by *Dexcom*. Update ASAP.
+These phones are limited to *iOS* 16. No longer supported by *Dexcom*. Update ASAP. The next version of the *Loop* app will require *iOS* 18 as a minimum.
 
 - iPhone X, without an extra letter
 - iPhone 8, all variants

diff --git a/docs/build/pump.md b/docs/build/pump.md
@@ -29,7 +29,7 @@ These types of pumps are compatible with the *Loop* app.
 * [Omnipod Eros Pods](pump.md#omnipod-pumps)
 * [Omnipod DASH Pods](#omnipod-dash)
     * See caveat about [iPhone 16 and 17e](phone.md#compatible-device){: target="_blank" }
-* [Omnipod 5 Pods](#omnipod-5) are not supported yet
+* [Omnipod 5 Pods](#omnipod-5) only available in development branches
 * [Medtrum Touchcare Nano](#medtrum-nano) (v3.14.2 or newer)
 * [Older Medtronic pumps](pump.md#check-medtronic-pump-version)
 
@@ -47,13 +47,13 @@ You must build a special branch to test some pumps. Please only test if you are
 
 ### Omnipod Eros
 
-Eros pods (also known as Gen 3 or Classic) were launched in 2013 and continue to be sold by Insulet in some countries. Insulet stopped providing Eros pods in the US end of December 2023. As far as we know, there are no timelines announced for the discontinuation of Eros pods for other countries. Insulet doesn't specifically call these "Eros" anymore, they just use the term "Omnipod system". For clarity, from [Insulet's webpage](https://www.omnipod.com/discontinuation):
+Eros Pods (also known as Gen 3 or Classic) were launched in 2013 and continue to be sold by Insulet in some countries. Insulet stopped providing Eros Pods in the US end of December 2023. As far as we know, there are no timelines announced for the discontinuation of Eros Pods for other countries. Insulet doesn't specifically call these "Eros" anymore, they just use the term "Omnipod system". For clarity, from [Insulet's webpage](https://www.omnipod.com/discontinuation):
 
 !!! info "Alternative Names for Omnipod Eros Pump and Pods"
 
     **Eros** pump is also known as **Classic**, or **UST400**, or *Omnipod Insulin Management* **System**.  
 
-    Pharmacy sites sometimes may refer to the **Eros pods** as **Gen 3** but they are the same exact pods. 
+    Pharmacy sites sometimes may refer to the **Eros Pods** as **Gen 3** but they are the same Pods. 
 
 Eros system has a big Personal Diabetes Manager (PDM) that does not look like a phone.
 
@@ -62,7 +62,7 @@ Eros system has a big Personal Diabetes Manager (PDM) that does not look like a
 
 ### Omnipod DASH
 
-The DASH system has the newer, slimmer locked-android Personal Diabetes Manager (PDM) and built-in BLE communications in the pod, so there is no requirement for a RileyLink compatible device.
+The DASH system has the newer, slimmer locked-android Personal Diabetes Manager (PDM) and built-in BLE communications in the Pod, so there is no requirement for a RileyLink compatible device.
 
 **A RileyLink-compatible device is not required to use DASH with the *Loop* app. The communication with your iPhone uses Bluetooth.**
 
@@ -73,10 +73,14 @@ The DASH system has the newer, slimmer locked-android Personal Diabetes Manager
 
 ### Omnipod 5
 
-Loop does not support Omnipod 5 pods yet but it is coming soon. 
+Loop does not support Omnipod 5 Pods in the released code.
 
-* There is an on-going private beta test with Omnipod 5
-* We cannot give a timeline for when this will land in `dev` for public beta
+* There is an on-going public beta test with Omnipod 5
+* You must build a development branch to test Omnipod 5 - we encourage most people to wait while experienced users test this implementation
+    * Be sure to read the [Omnipod 5 FAQs](../faqs/omnipod-faqs.md#is-omnipod-5-available-for-open-beta-testing){: target="_blank" }
+    * See [Updates in dev](../version/development.md#updates-in-dev){: target="_blank" } if you are an experienced user who wants to help with testing and are willing to build frequently and report any issues to the development team
+    * Omnipod 5 code is experimental and does not provide a heartbeat
+    * This means you rely on your CGM to wake up the app when it is in the background or the phone is locked
 
 - - -
 

diff --git a/docs/faqs/cgm-faqs.md b/docs/faqs/cgm-faqs.md
@@ -2,13 +2,15 @@
 
 The following CGM are supported by some or all versions of Loop:
 
-* All *Dexcom* CGM (Loop 3 and later)
-* Some *Libre* CGM (Loop 3.4 and later)
-* Eversense E3 and 365 (Loop 3.11 and later, via an experimental feature branch)
+* All *Dexcom* CGM (*Loop* v3 and later)
+    * This includes 15-day G7 CGM
+* Some *Libre* CGM (*Loop* v3.4 and later)
+    * Coming soon *Libre* 3/3+ support is available in [next-dev branch](../version/development.md#updates-in-dev) for experienced users
+* Eversense E3 and 365 (included with *Loop* v3.14.2 and newer)
 * Medtronic Enlite CGM when used with a compatible pump
 * Remote CGM (requires internet access)
     * *Dexcom* Share
-    * Nightscout as CGM (Loop 3 and later)
+    * Nightscout as CGM
 
 See also: [Compatible CGM](../build/cgm.md){: target="_blank" } and [CGM Customization](#cgm-customization)
 
@@ -28,6 +30,10 @@ With no recent glucose readings, your pump returns to the scheduled basal delive
 
 Loop continues to accept carb entries and manual bolus commands. [Manual Temp Basal](../loop-3/omnipod.md#manual-temp-basal) can also be commanded.
 
+### Is the 15-day *Dexcom* G7 Supported?
+
+Yes. Support for the 15-day *Dexcom* G7 was added with *Loop* v3.10.0 in January 2026.
+
 ### *Dexcom* G7 Warmup
 
 The *Dexcom* G7 (and ONE+) begins warming up as soon as you insert the device and completes in less than half an hour. Many Loopers use the combination of this warmup upon insertion and the 12-hour grace period offered by the G7 to have continuous CGM readings with no gap.
@@ -118,6 +124,8 @@ Loop 3.4.x and later enables the use of those *Libre* sensors supported by [Libr
 
 ### What about other *Libre* sensors?
 
+> Coming soon *Libre* 3/3+ support is available in [next-dev branch](../version/development.md#updates-in-dev){: target="_blank"} for experienced users
+
 There are a number of *Libre* sensors in which the only option for digital access to the CGM readings is to use the app provided by the vendor: [*LibreLinkUp*](https://librelinkup.com/). This enables you to upload your data to the *LibreLinkUp* servers and then access the data from there.
 
 **The use of *LibreLinkUp* requires internet access via WiFi or Cell service.**
@@ -139,6 +147,8 @@ Yes.
 
 ## CGM Customization
 
+> Coming soon *Libre* 3/3+ support is available in [next-dev branch](../version/development.md#updates-in-dev){: target="_blank"} for experienced users
+
 If you can connect your CGM directly to *Loop* that is preferred. You can customize the *Loop* app to interface with the *xDrip4iOS* DIY CGM app if you prefer.  You can use *xDrip4iOS* as a follower instead of a client to get some features from *xDrip4iOS* without any need to customize the *Loop* app.
 
 If possible, it is recommended that *Libre* users take advantage of [LibreTransmitter](https://github.com/LoopKit/LibreTransmitter/blob/main/readme.md) which is incorporated into the *Loop* app for version 3.4 and later. However, some *Libre* sensors have encryption that limits ability to get data through open-source code and instead requires using the *LibreLinkUp* server.