diff --git a/docs/dragon/q6a/hardware-use/mipi-dsi.md b/docs/dragon/q6a/hardware-use/mipi-dsi.md
index e788c8a49..7a1fb1af1 100644
--- a/docs/dragon/q6a/hardware-use/mipi-dsi.md
+++ b/docs/dragon/q6a/hardware-use/mipi-dsi.md
@@ -13,9 +13,13 @@ sidebar_position: 11
 | [Radxa Display 10 FHD](https://radxa.com/products/accessories/display-10fhd) |        10.1        | 1200\*1920 |
 |   [Radxa Display 8 HD](https://radxa.com/products/accessories/display-8hd)   |         8          | 800\*1280  |
 
+:::note
+仅支持上表列出的瑞莎官方显示器。第三方显示器（例如 Raspberry Pi 7\" 触控屏）未经官方适配：即使通过转接排线完成物理连接，显示与触控功能仍取决于系统镜像中是否包含匹配的 panel driver / 设备树，无法保证兼容。
+:::
+
 ## 硬件连接
 
-将 MIPI 显示屏通过 FPC 排线连接到 Dragon Q6A 的 MIPI DSI 接口。
+将 MIPI 显示屏通过 FPC 排线连接到 Dragon Q6A 的 MIPI DSI 接口（39-Pin / 0.3mm 间距 FPC 接口）。
 
 :::tip 接口位置
 可以参考 [硬件信息](./hardware-info) 教程找到对应硬件接口位置
diff --git a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
index 3e4fedfd7..940a6aba9 100644
--- a/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
+++ b/i18n/en/docusaurus-plugin-content-docs/current/dragon/q6a/hardware-use/mipi-dsi.md
@@ -13,9 +13,13 @@ The Dragon Q6A has one 4-lane MIPI DSI interface on board for connecting MIPI di
 | [Radxa Display 10 FHD](https://radxa.com/products/accessories/display-10fhd) |       10.1       | 1200\*1920 |
 |   [Radxa Display 8 HD](https://radxa.com/products/accessories/display-8hd)   |        8         | 800\*1280  |
 
+:::note
+Only the Radxa official displays listed above are supported. Third-party displays (e.g., the Raspberry Pi 7\" touchscreen) are not officially adapted: even if a physical connection is made with an adapter cable, display and touch functionality depend on whether the system image includes a matching panel driver / device tree, and compatibility cannot be guaranteed.
+:::
+
 ## Hardware Connection
 
-Connect the MIPI display to the Dragon Q6A's MIPI DSI interface via an FPC ribbon cable.
+Connect the MIPI display to the Dragon Q6A's MIPI DSI interface (39-Pin / 0.3mm pitch FPC connector) via an FPC ribbon cable.
 
 :::tip Interface Location
 Refer to the [Hardware Information](./hardware-info) tutorial to locate the corresponding hardware interface.