bt over usb fail on hamoa with 7.0.0-rc2 #381
Description
Probe issue bt over usb on hamoa with 7.0.0-rc2
Internal CR: https://orbit/cr/4464912
root@iq-x7181-evk:~# bluetoothctl
Agent registered
[bluetoothctl]> power on
No default controller available
[bluetoothctl]>
root@iq-x7181-evk:~# hciconfig
hci0: Type: Primary Bus: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:20 acl:0 sco:0 commands:4 errors:0
root@iq-x7181-evk:~# dmesg | grep -i bluetooth
[ 13.392593] Bluetooth: Core ver 2.22
[ 13.404616] NET: Registered PF_BLUETOOTH protocol family
[ 13.456936] Bluetooth: HCI device and connection manager initialized
[ 13.469025] Bluetooth: HCI socket layer initialized
[ 13.489830] Bluetooth: L2CAP socket layer initialized
[ 13.511708] Bluetooth: SCO socket layer initialized
[ 13.591996] Bluetooth: HCI UART driver ver 2.3
[ 13.615393] Bluetooth: HCI UART protocol H4 registered
[ 13.615404] Bluetooth: HCI UART protocol LL registered
[ 13.636385] Bluetooth: HCI UART protocol QCA registered
[ 13.637056] Bluetooth: hci0: setting up wcn7850
[ 15.265547] Bluetooth: hci1: using rampatch file: qca/rampatch_usb_00130201.bin
[ 15.281663] Bluetooth: hci1: QCA: patch rome 0x130201 build 0x9478, firmware rome 0x130201 build 0x38e6
[ 15.829562] Bluetooth: hci1: using NVM file: qca/nvm_usb_00130201_gf_010a.bin
[ 16.019407] Bluetooth: hci1: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 16.067277] Bluetooth: hci0: command 0xfc00 tx timeout
[ 16.082032] Bluetooth: hci0: Reading QCA version information failed (-110)
[ 16.089151] Bluetooth: hci0: Retry BT power ON:0
[ 16.100244] Bluetooth: hci1: Opcode 0x201c failed: -71
[ 16.541006] Bluetooth: hci1: using rampatch file: qca/rampatch_usb_00130201.bin
[ 16.541014] Bluetooth: hci1: QCA: patch rome 0x130201 build 0x9478, firmware rome 0x130201 build 0x38e6
[ 17.097738] Bluetooth: hci1: using NVM file: qca/nvm_usb_00130201_gf_010a.bin
[ 17.240604] Bluetooth: hci1: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 17.565164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.576014] Bluetooth: BNEP filters: protocol multicast
[ 17.581900] Bluetooth: BNEP socket layer initialized
[ 17.588839] Bluetooth: MGMT ver 1.23
[ 17.598521] Bluetooth: RFCOMM TTY layer initialized
[ 17.603564] Bluetooth: RFCOMM socket layer initialized
[ 17.608872] Bluetooth: RFCOMM ver 1.11
[ 18.623124] Bluetooth: hci0: command 0xfc00 tx timeout
[ 18.628462] Bluetooth: hci0: Reading QCA version information failed (-110)
[ 18.635573] Bluetooth: hci0: Retry BT power ON:1
[ 19.103947] Bluetooth: hci1: using rampatch file: qca/rampatch_usb_00130201.bin
[ 19.111525] Bluetooth: hci1: QCA: patch rome 0x130201 build 0x9478, firmware rome 0x130201 build 0x38e6
[ 19.671514] Bluetooth: hci1: using NVM file: qca/nvm_usb_00130201_gf_010a.bin
[ 19.807161] Bluetooth: hci1: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 19.911552] Bluetooth: MGMT ver 1.23
[ 20.707446] Bluetooth: hci0: command 0xfc00 tx timeout
[ 20.724368] Bluetooth: hci0: Reading QCA version information failed (-110)
[ 20.739993] Bluetooth: hci0: Retry BT power ON:2
[ 21.192274] Bluetooth: hci1: using rampatch file: qca/rampatch_usb_00130201.bin
[ 21.199843] Bluetooth: hci1: QCA: patch rome 0x130201 build 0x9478, firmware rome 0x130201 build 0x38e6
[ 21.816212] Bluetooth: hci1: using NVM file: qca/nvm_usb_00130201_gf_010a.bin
[ 21.963000] Bluetooth: hci1: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 22.118915] Bluetooth: MGMT ver 1.23
[ 22.815472] Bluetooth: hci0: command 0xfc00 tx timeout
[ 22.820896] Bluetooth: hci0: Reading QCA version information failed (-110)