[BUG] Accidental Ctrl+W on host casues sticky Ctrl in guest

[dionorgua]

Is there an existing issue for this?

• I have searched the existing issues

Current Behavior

I've tried to run both arch-kde and alpine-kde with PIXELFLUX_WAYLAND=1.

Desktop starts and looks amazing. But if I accidentally press Ctrl+W (host browser windowed is Chrome in this case) it closes tab (expected). But I reopen it again I'm getting to same desktop (expected) but now remote session thinks that Ctrl is pressed.

So pressing just "R" triggers shell history search, etc. And there is no way to release Ctrl key. I've tried to press/release key again.

I've also tried same thing with debian-kde and latest (without PIXELFLUX_WAYLAND). In all these cases Ctrl also 'stuck'. But it's possible to release key by pressing it again.

Expected Behavior

Ideally Ctrl and any other modifier should be released automatically on tab close. Or it should be possible to release them by pressing and releasing same key again.

Steps To Reproduce

• Launch Webtop (any KDE wayland image) in chrome (at least on Linux host)
• Open terminal inside webtop
• Type something
• Press Ctrl+W
• Observe that host browser tab closed
• Restore tab via browser UI or just open webtop again
• Press 'C' and observe that shell is doing "Ctrl+C"
• Press and release Ctrl

On X11 Ctrl is released and now works as expected, but on Wayland Ctrl is stuck forever

Environment

- OS:Debian 13
- How docker service was installed: both https://github.com/docker/docker-install and podman

CPU architecture

x86-64

Docker creation

podman run --rm -p 3000:3000 -p 3001:3001 --shm-size="1gb" -e PUID=1000 -e PGID=1000 -e PIXELFLUX_WAYLAND=true -e DRINODE=/dev/dri/renderD128 -e DRI_NODE=/dev/dri/renderD128 --device /dev/dri --security-opt seccomp=unconfined webtop:alpine-kde

Container logs

[migrations] started
[migrations] no migrations found
───────────────────────────────────────

      ██╗     ███████╗██╗ ██████╗
      ██║     ██╔════╝██║██╔═══██╗
      ██║     ███████╗██║██║   ██║
      ██║     ╚════██║██║██║   ██║
      ███████╗███████║██║╚██████╔╝
      ╚══════╝╚══════╝╚═╝ ╚═════╝

   Brought to you by linuxserver.io
───────────────────────────────────────

To support LSIO projects visit:
https://www.linuxserver.io/donate/

───────────────────────────────────────
GID/UID
───────────────────────────────────────

User UID:    1000
User GID:    1000
───────────────────────────────────────
.........+....+++++++++++++++++++++++++++++++++++++++*..+..........+...+......+..+++++++++++++++++++++++++++++++++++++++*...+.........+...+......+.+...........+...+.......+...+......+..............+..........+.....+.+......+...+.....+......+.+.........+...............+...+...+........+......+.+...+....................+.......+..................+...........+.+.....+....+........+.......+.........+.....+....+.....+.+.........+..+...+..........+.....+...+...+.......+..+.+.....+.+.....+..........+........................+..............+.......+........+.+..+....+...........+.......+..+..........++++++
..+......+......+.....+.+........+.........+.+.........+...+.....+....+...........+.........+..........+........+..........+.....+.+.....+.+...+..+++++++++++++++++++++++++++++++++++++++*.....+......+...............+..+...+.......+......+..+....+...+...........+.+...+......+++++++++++++++++++++++++++++++++++++++*.........+.....+...+......+.+...+.................+......+...............+....+...+..+...+.+.........+...++++++
-----
[ls.io-init] Creating initial backup of menu.xml
[ls.io-init] Generating labwc rc.xml from template
[custom-init] No custom files found, skipping...
[svc-de] Wayland mode: Waiting for socket at /config/.XDG/wayland-1...
[ls.io-init] done.
19
20
INFO:selkies.__main__:Starting mode 'websockets'...
INFO:selkies.__main__:Starting Selkies in 'websockets' mode.
INFO:data_websocket:pcmflux library found. Audio capture is available.
INFO:data_websocket:pixelflux library found. Striped encoding modes available.
[Wayland] Initializing GL Renderer using device: /dev/dri/renderD128
INFO:root:Expected C js_config_t size (from ctypes): 1354 bytes
[Wayland] Warning: Failed to bind EGL to Wayland Display (Optional): EglExtensionNotSupported(["EGL_WL_bind_wayland_display"])
[Wayland] Socket listening on: "wayland-1"
INFO:main:Upload directory ensured: /config/Desktop
INFO:main:Legacy Mode ENABLED (SELKIES_MASTER_TOKEN is not set).
INFO:main:Starting Selkies (WebSocket Mode) with settings: {'_setting_definitions': [{'name': 'audio_enabled', 'type': 'bool', 'default': True, 'help': 'Enable server-to-client audio streaming.'}, {'name': 'microphone_enabled', 'type': 'bool', 'default': True, 'help': 'Enable client-to-server microphone forwarding.'}, {'name': 'gamepad_enabled', 'type': 'bool', 'default': True, 'help': 'Enable gamepad support.'}, {'name': 'clipboard_enabled', 'type': 'bool', 'default': True, 'help': 'Enable clipboard synchronization.'}, {'name': 'clipboard_in_enabled', 'type': 'bool', 'default': True, 'help': 'Enable client-to-server clipboard synchronization.'}, {'name': 'clipboard_out_enabled', 'type': 'bool', 'default': True, 'help': 'Enable server-to-client clipboard synchronization.'}, {'name': 'command_enabled', 'type': 'bool', 'default': True, 'help': 'Enable parsing of command websocket messages.'}, {'name': 'file_transfers', 'type': 'list', 'default': 'upload,download', 'meta': {'allowed': ['upload', 'download']}, 'help': 'Allowed file transfer directions (comma-separated: "upload,download"). Set to "" or "none" to disable.'}, {'name': 'framerate', 'type': 'range', 'default': '8-120', 'meta': {'default_value': 60}, 'help': 'Allowed framerate range (e.g., "8-165") or a fixed value (e.g., "60").'}, {'name': 'audio_bitrate', 'type': 'enum', 'default': '320000', 'meta': {'allowed': ['64000', '128000', '192000', '256000', '320000']}, 'help': 'The default audio bitrate.'}, {'name': 'is_manual_resolution_mode', 'type': 'bool', 'default': False, 'help': 'Lock the resolution to the manual width/height values.'}, {'name': 'manual_width', 'type': 'int', 'default': 0, 'help': 'Lock width to a fixed value. Setting this forces manual resolution mode.'}, {'name': 'manual_height', 'type': 'int', 'default': 0, 'help': 'Lock height to a fixed value. Setting this forces manual resolution mode.'}, {'name': 'scaling_dpi', 'type': 'enum', 'default': '96', 'meta': {'allowed': ['96', '120', '144', '168', '192', '216', '240', '264', '288']}, 'help': 'The default DPI for UI scaling.'}, {'name': 'enable_binary_clipboard', 'type': 'bool', 'default': False, 'help': 'Allow binary data (e.g., images) on the clipboard.'}, {'name': 'use_browser_cursors', 'type': 'bool', 'default': False, 'help': 'Use browser CSS cursors instead of rendering to canvas.'}, {'name': 'use_css_scaling', 'type': 'bool', 'default': False, 'help': 'HiDPI when false, if true a lower resolution is sent from the client and the canvas is stretched.'}, {'name': 'ui_title', 'type': 'str', 'default': 'Selkies', 'help': 'Title in top left corner of sidebar.'}, {'name': 'ui_show_logo', 'type': 'bool', 'default': True, 'help': 'Show the Selkies logo in the sidebar.'}, {'name': 'ui_show_core_buttons', 'type': 'bool', 'default': True, 'help': 'Show the core components buttons display, audio, microphone, and gamepad.'}, {'name': 'ui_show_sidebar', 'type': 'bool', 'default': True, 'help': 'Show the main sidebar UI.'}, {'name': 'ui_sidebar_show_video_settings', 'type': 'bool', 'default': True, 'help': 'Show the video settings section in the sidebar.'}, {'name': 'ui_sidebar_show_screen_settings', 'type': 'bool', 'default': True, 'help': 'Show the screen settings section in the sidebar.'}, {'name': 'ui_sidebar_show_audio_settings', 'type': 'bool', 'default': True, 'help': 'Show the audio settings section in the sidebar.'}, {'name': 'ui_sidebar_show_stats', 'type': 'bool', 'default': True, 'help': 'Show the stats section in the sidebar.'}, {'name': 'ui_sidebar_show_clipboard', 'type': 'bool', 'default': True, 'help': 'Show the clipboard section in the sidebar.'}, {'name': 'ui_sidebar_show_files', 'type': 'bool', 'default': True, 'help': 'Show the file transfer section in the sidebar.'}, {'name': 'ui_sidebar_show_apps', 'type': 'bool', 'default': True, 'help': 'Show the applications section in the sidebar.'}, {'name': 'ui_sidebar_show_sharing', 'type': 'bool', 'default': True, 'help': 'Show the sharing section in the sidebar.'}, {'name': 'ui_sidebar_show_gamepads', 'type': 'bool', 'default': True, 'help': 'Show the gamepads section in the sidebar.'}, {'name': 'ui_sidebar_show_fullscreen', 'type': 'bool', 'default': True, 'help': 'Show the fullscreen button in the sidebar.'}, {'name': 'ui_sidebar_show_gaming_mode', 'type': 'bool', 'default': True, 'help': 'Show the gaming mode button in the sidebar.'}, {'name': 'ui_sidebar_show_trackpad', 'type': 'bool', 'default': True, 'help': 'Show the virtual trackpad button in the sidebar.'}, {'name': 'ui_sidebar_show_keyboard_button', 'type': 'bool', 'default': True, 'help': 'Show the on-screen keyboard button in the display area.'}, {'name': 'ui_sidebar_show_soft_buttons', 'type': 'bool', 'default': True, 'help': 'Show the soft buttons section in the sidebar.'}, {'name': 'enable_sharing', 'type': 'bool', 'default': True, 'help': 'Master toggle for all sharing features.'}, {'name': 'enable_collab', 'type': 'bool', 'default': True, 'help': 'Enable collaborative (read-write) sharing link.'}, {'name': 'enable_shared', 'type': 'bool', 'default': True, 'help': 'Enable view-only sharing links.'}, {'name': 'enable_player2', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 2.'}, {'name': 'enable_player3', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 3.'}, {'name': 'enable_player4', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 4.'}, {'name': 'debug', 'type': 'bool', 'default': False, 'help': 'Enable debug logging.'}, {'name': 'mode', 'type': 'str', 'default': 'websockets', 'help': "Specify the mode: 'webrtc' or 'websockets'; defaults to websockets"}, {'name': 'enable_dual_mode', 'type': 'bool', 'default': False, 'help': 'Enable switching Streaming modes from UI'}, {'name': 'audio_device_name', 'type': 'str', 'default': 'output.monitor', 'help': 'Audio device name for pcmflux capture.'}, {'name': 'encoder', 'type': 'enum', 'default': 'x264enc', 'meta': {'allowed': ['x264enc', 'x264enc-striped', 'jpeg']}, 'help': 'The default video encoder.'}, {'name': 'h264_crf', 'type': 'range', 'default': '5-50', 'meta': {'default_value': 25}, 'help': 'Allowed H.264 CRF range (e.g., "5-50") or a fixed value.'}, {'name': 'jpeg_quality', 'type': 'range', 'default': '1-100', 'meta': {'default_value': 40}, 'help': 'Allowed JPEG quality range (e.g., "1-100") or a fixed value.'}, {'name': 'h264_fullcolor', 'type': 'bool', 'default': False, 'help': 'Enable H.264 full color range for pixelflux encoders.'}, {'name': 'h264_streaming_mode', 'type': 'bool', 'default': False, 'help': 'Enable H.264 streaming mode for pixelflux encoders.'}, {'name': 'use_cpu', 'type': 'bool', 'default': False, 'help': 'Force CPU-based encoding for pixelflux.'}, {'name': 'use_paint_over_quality', 'type': 'bool', 'default': True, 'help': 'Enable high-quality paint-over for static scenes.'}, {'name': 'paint_over_jpeg_quality', 'type': 'range', 'default': '1-100', 'meta': {'default_value': 90}, 'help': 'Allowed JPEG paint-over quality range or a fixed value.'}, {'name': 'h264_paintover_crf', 'type': 'range', 'default': '5-50', 'meta': {'default_value': 18}, 'help': 'Allowed H.264 paint-over CRF range or a fixed value.'}, {'name': 'h264_paintover_burst_frames', 'type': 'range', 'default': '1-30', 'meta': {'default_value': 5}, 'help': 'Allowed H.264 paint-over burst frames range or a fixed value.'}, {'name': 'second_screen', 'type': 'bool', 'default': True, 'help': 'Enable support for a second monitor/display.'}, {'name': 'port', 'type': 'int', 'default': 8081, 'env_var': 'CUSTOM_WS_PORT', 'help': 'Port for the data websocket server.'}, {'name': 'control_port', 'type': 'int', 'default': 8083, 'help': 'Port for the internal control plane API.'}, {'name': 'master_token', 'type': 'str', 'default': '', 'help': 'Master token to enable secure mode and protect the control plane API.'}, {'name': 'dri_node', 'type': 'str', 'default': '', 'env_var': 'DRI_NODE', 'help': 'Path to the DRI render node for VA-API.'}, {'name': 'watermark_path', 'type': 'str', 'default': '', 'env_var': 'WATERMARK_PNG', 'help': 'Absolute path to the watermark PNG file.'}, {'name': 'watermark_location', 'type': 'int', 'default': -1, 'env_var': 'WATERMARK_LOCATION', 'help': 'Watermark location enum (0-6).'}, {'name': 'wayland_socket_index', 'type': 'int', 'default': 0, 'help': 'Index for the Wayland command socket (e.g. 0 for wayland-0).'}], 'audio_enabled': (True, False), 'microphone_enabled': (True, False), 'gamepad_enabled': (False, False), 'clipboard_enabled': (True, False), 'clipboard_in_enabled': (True, False), 'clipboard_out_enabled': (True, False), 'command_enabled': (True, False), 'file_transfers': ['upload', 'download'], 'framerate': (8, 120), 'audio_bitrate': '320000', 'is_manual_resolution_mode': (False, False), 'manual_width': 0, 'manual_height': 0, 'scaling_dpi': '96', 'enable_binary_clipboard': (False, False), 'use_browser_cursors': (False, False), 'use_css_scaling': (False, False), 'ui_title': 'Selkies', 'ui_show_logo': (True, False), 'ui_show_core_buttons': (True, False), 'ui_show_sidebar': (True, False), 'ui_sidebar_show_video_settings': (True, False), 'ui_sidebar_show_screen_settings': (True, False), 'ui_sidebar_show_audio_settings': (True, False), 'ui_sidebar_show_stats': (True, False), 'ui_sidebar_show_clipboard': (True, False), 'ui_sidebar_show_files': (True, False), 'ui_sidebar_show_apps': (True, False), 'ui_sidebar_show_sharing': (True, False), 'ui_sidebar_show_gamepads': (False, False), 'ui_sidebar_show_fullscreen': (True, False), 'ui_sidebar_show_gaming_mode': (True, False), 'ui_sidebar_show_trackpad': (True, False), 'ui_sidebar_show_keyboard_button': (True, False), 'ui_sidebar_show_soft_buttons': (True, False), 'enable_sharing': (True, False), 'enable_collab': (True, False), 'enable_shared': (True, False), 'enable_player2': (False, False), 'enable_player3': (False, False), 'enable_player4': (True, False), 'debug': (False, False), 'mode': 'websockets', 'enable_dual_mode': (False, False), 'audio_device_name': 'output.monitor', 'encoder': 'x264enc', 'h264_crf': (5, 50), 'jpeg_quality': (1, 100), 'h264_fullcolor': (False, False), 'h264_streaming_mode': (False, False), 'use_cpu': (False, False), 'use_paint_over_quality': (True, False), 'paint_over_jpeg_quality': (1, 100), 'h264_paintover_crf': (5, 50), 'h264_paintover_burst_frames': (1, 30), 'second_screen': (False, False), 'port': 8082, 'control_port': 8083, 'master_token': '', 'dri_node': '/dev/dri/renderD128', 'watermark_path': '', 'watermark_location': -1, 'wayland_socket_index': 0}
INFO:main:Initial Encoder: x264enc, Framerate: 60
INFO:main:SelkiesStreamingApp initialized: encoder=x264enc, display=1024x768
INFO:webrtc_input:kwin_wayland detected: enabling Clipboard-Input fallback for Unicode.
INFO:webrtc_input:Wayland input injection initialized.
INFO:webrtc_input:Built Wayland scancode map with 491 keys.
INFO:main:All main components initialized. Running server...
INFO:webrtc_input:Initializing 4 persistent gamepad instances...
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js0): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js0.sock, EVDEV socket: /tmp/selkies_event1000.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 0 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js0.sock, EVDEV: /tmp/selkies_event1000.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js1): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js1.sock, EVDEV socket: /tmp/selkies_event1001.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 1 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js1.sock, EVDEV: /tmp/selkies_event1001.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js2): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js2.sock, EVDEV socket: /tmp/selkies_event1002.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 2 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js2.sock, EVDEV: /tmp/selkies_event1002.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js3): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js3.sock, EVDEV socket: /tmp/selkies_event1003.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 3 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js3.sock, EVDEV: /tmp/selkies_event1003.sock).
INFO:webrtc_input:Clipboard monitor running (binary mode: False)
INFO:webrtc_input:Wayland mode: Cursor monitor disabled (handled by compositor callback).
INFO:selkies_gamepad:Gamepad /tmp/selkies_js0.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js0.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js1.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js1.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js2.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js2.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js3.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js3.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1000.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1001.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1002.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1003.sock
INFO:data_websocket:Data WebSocket Server listening on port 8082
[svc-de] /config/.XDG/wayland-1 found launching de
Applying KWin clipboard rule...
kbuildsycoca6 running...
INFO:data_websocket:Legacy client ('127.0.0.1', 34644) connected. Role: controller, Slot: None
INFO:data_websocket:Data WebSocket connected from ('127.0.0.1', 34644)
INFO:data_websocket:Attempting to establish PulseAudio connection...
INFO:data_websocket:PulseAudio connection established.
INFO:data_websocket:Registering new client for display: primary
INFO:data_websocket:Applying and sanitizing client settings for 'primary' (initial=True)
INFO:data_websocket:DPI changed from None to 96. Applying system-level change.
INFO:data_websocket:Initial setup or dimensional change detected for 'primary'. Performing full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Calculating new extended desktop layout from ALL clients...
INFO:data_websocket:Layout calculated: Total Size=1264x802. Layouts: {'primary': {'x': 0, 'y': 0, 'w': 1264, 'h': 802}}
INFO:data_websocket:Starting separate capture instances for each ACTIVE display region...
INFO:data_websocket:Client 'primary' is active. Starting its capture.
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
[Wayland] Configuring Output: 1264x802 @ 60.00 FPS (Scale 1.00)
INFO:data_websocket:Video chunk sender started for display 'primary'.
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:data_websocket:Broadcasting primary stream resolution to all clients: {"type": "stream_resolution", "width": 1264, "height": 802}
INFO:data_websocket:Broadcasting display config update: DISPLAY_CONFIG_UPDATE,{"type": "display_config_update", "displays": ["primary"]}
INFO:data_websocket:Display reconfiguration finished successfully.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Initial client settings message processed by ws_handler.
INFO:data_websocket:Initial setup: Primary client connected, audio not active, attempting start.
INFO:data_websocket:Starting pcmflux audio pipeline...
INFO:data_websocket:pcmflux settings: device='output.monitor', bitrate=320000, channels=2
[Wayland] Encode Node Index: 0 | Driver: ../../../bus/pci/drivers/i915
[Wayland] Initializing Unified VAAPI Encoder...
[pcmflux] Attempting to connect to PulseAudio device: output.monitor with latency: 10ms
INFO:data_websocket:pcmflux audio capture started successfully.
INFO:data_websocket:pcmflux audio chunk broadcasting task started.
[pcmflux] SUCCESS: Connected to PulseAudio.
[pcmflux] SUCCESS: Opus encoder created.
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: Off, Debug Logging: Off, PCM Chunk: 3840 bytes
[Wayland] VAAPI Encoder initialized successfully.
[Wayland] Decision: Zero-Copy path active.
Stream settings active -> Res: 1264x802 | FPS: 60.0 | Stripes: 1 | Mode: H264 (VAAPI) FullFrame Streaming | CRF: 25 | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
INFO:data_websocket:Received START_AUDIO command from client for server-to-client audio.
INFO:data_websocket:START_AUDIO: pcmflux audio pipeline already active.
INFO:data_websocket:Received redundant resize request for primary (1264x802). No action taken.
[pcmflux] First non-silent audio chunk detected! Encoding...
INFO:data_websocket:Received STOP_VIDEO for 'primary'. Stopping stream.
INFO:data_websocket:Stopping all streams for display 'primary'...
[Wayland] Capture loop stopped.
INFO:data_websocket:Successfully stopped all streams for display 'primary'.
INFO:data_websocket:Video chunk sender for 'primary' cancelled.
INFO:data_websocket:Video chunk sender for 'primary' finished.
INFO:data_websocket:Received START_VIDEO for 'primary'. Starting its stream.
INFO:data_websocket:Found existing layout for 'primary'. Starting capture with: {'x': 0, 'y': 0, 'w': 1264, 'h': 802}
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
INFO:data_websocket:Video chunk sender started for display 'primary'.
[Wayland] Encode Node Index: 0 | Driver: ../../../bus/pci/drivers/i915
[Wayland] Initializing Unified VAAPI Encoder...
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:webrtc_input:Set clipboard content, length: 244
[Wayland] VAAPI Encoder initialized successfully.
[Wayland] Decision: Zero-Copy path active.
Stream settings active -> Res: 1264x802 | FPS: 60.0 | Stripes: 1 | Mode: H264 (VAAPI) FullFrame Streaming | CRF: 25 | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
INFO:webrtc_input:Clipboard changed. Sending content (text/plain)
INFO:data_websocket:Cleaning up Data WS handler for ('127.0.0.1', 34644) (Display ID: primary)...
INFO:data_websocket:Client for 'primary' disconnected. Removing and triggering full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Stopping all existing capture and backpressure tasks...
[Wayland] Capture loop stopped.
INFO:data_websocket:All capture instances, senders, and backpressure tasks stopped.
WARNING:data_websocket:No display clients connected. Video pipelines remain stopped.
INFO:data_websocket:Video chunk sender for 'primary' cancelled.
INFO:data_websocket:Video chunk sender for 'primary' finished.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Last client (('127.0.0.1', 34644)) disconnected. All pipelines should have been stopped by reconfigure_displays.
INFO:main:Initiating unified pipeline shutdown...
WARNING:data_websocket:Reconfiguration already in progress. Ignoring concurrent request.
INFO:data_websocket:Stopping pcmflux audio pipeline...
INFO:data_websocket:pcmflux audio chunk broadcasting task cancelled.
INFO:data_websocket:pcmflux audio chunk broadcasting task finished.
[pcmflux] Stop requested. Cleaning up capture loop...
[pcmflux] Audio capture loop finished. Resources released.
INFO:data_websocket:pcmflux audio pipeline stopped.
INFO:main:Unified pipeline shutdown complete.
INFO:data_websocket:Data WS handler for ('127.0.0.1', 34644) finished all cleanup.
INFO:data_websocket:Stats sender: WS connection closed.
INFO:data_websocket:Legacy client ('127.0.0.1', 40118) connected. Role: controller, Slot: None
INFO:data_websocket:Data WebSocket connected from ('127.0.0.1', 40118)
INFO:data_websocket:Sending last known cursor to new client ('127.0.0.1', 40118)
INFO:data_websocket:Attempting to establish PulseAudio connection...
INFO:data_websocket:PulseAudio connection established.
INFO:data_websocket:Registering new client for display: primary
INFO:data_websocket:Applying and sanitizing client settings for 'primary' (initial=True)
INFO:data_websocket:DPI changed from None to 96. Applying system-level change.
INFO:data_websocket:Initial setup or dimensional change detected for 'primary'. Performing full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Calculating new extended desktop layout from ALL clients...
INFO:data_websocket:Layout calculated: Total Size=1264x802. Layouts: {'primary': {'x': 0, 'y': 0, 'w': 1264, 'h': 802}}
INFO:data_websocket:Starting separate capture instances for each ACTIVE display region...
INFO:data_websocket:Client 'primary' is active. Starting its capture.
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
INFO:data_websocket:Video chunk sender started for display 'primary'.
[Wayland] Encode Node Index: 0 | Driver: ../../../bus/pci/drivers/i915
[Wayland] Initializing Unified VAAPI Encoder...
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:data_websocket:Broadcasting primary stream resolution to all clients: {"type": "stream_resolution", "width": 1264, "height": 802}
INFO:data_websocket:Broadcasting display config update: DISPLAY_CONFIG_UPDATE,{"type": "display_config_update", "displays": ["primary"]}
INFO:data_websocket:Display reconfiguration finished successfully.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Initial client settings message processed by ws_handler.
INFO:data_websocket:Initial setup: Primary client connected, audio not active, attempting start.
INFO:data_websocket:Starting pcmflux audio pipeline...
INFO:data_websocket:pcmflux settings: device='output.monitor', bitrate=320000, channels=2
[pcmflux] Attempting to connect to PulseAudio device: output.monitor with latency: 10ms
INFO:data_websocket:pcmflux audio capture started successfully.
INFO:data_websocket:pcmflux audio chunk broadcasting task started.
[pcmflux] SUCCESS: Connected to PulseAudio.
[pcmflux] SUCCESS: Opus encoder created.
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: Off, Debug Logging: Off, PCM Chunk: 3840 bytes
INFO:data_websocket:Received START_AUDIO command from client for server-to-client audio.
INFO:data_websocket:START_AUDIO: pcmflux audio pipeline already active.
INFO:data_websocket:Received redundant resize request for primary (1264x802). No action taken.
[Wayland] VAAPI Encoder initialized successfully.
[Wayland] Decision: Zero-Copy path active.
Stream settings active -> Res: 1264x802 | FPS: 60.0 | Stripes: 1 | Mode: H264 (VAAPI) FullFrame Streaming | CRF: 25 | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[pcmflux] First non-silent audio chunk detected! Encoding...
dion@dnezhevenko-nout:~% podman logs frosty_cerf > /tmp/log.txt
.........+....+++++++++++++++++++++++++++++++++++++++*..+..........+...+......+..+++++++++++++++++++++++++++++++++++++++*...+.........+...+......+.+...........+...+.......+...+......+..............+..........+.....+.+......+...+.....+......+.+.........+...............+...+...+........+......+.+...+....................+.......+..................+...........+.+.....+....+........+.......+.........+.....+....+.....+.+.........+..+...+..........+.....+...+...+.......+..+.+.....+.+.....+..........+........................+..............+.......+........+.+..+....+...........+.......+..+..........++++++
..+......+......+.....+.+........+.........+.+.........+...+.....+....+...........+.........+..........+........+..........+.....+.+.....+.+...+..+++++++++++++++++++++++++++++++++++++++*.....+......+...............+..+...+.......+......+..+....+...+...........+.+...+......+++++++++++++++++++++++++++++++++++++++*.........+.....+...+......+.+...+.................+......+...............+....+...+..+...+.+.........+...++++++
-----
INFO:selkies.__main__:Starting mode 'websockets'...
INFO:selkies.__main__:Starting Selkies in 'websockets' mode.
INFO:data_websocket:pcmflux library found. Audio capture is available.
INFO:data_websocket:pixelflux library found. Striped encoding modes available.
INFO:root:Expected C js_config_t size (from ctypes): 1354 bytes
INFO:main:Upload directory ensured: /config/Desktop
INFO:main:Legacy Mode ENABLED (SELKIES_MASTER_TOKEN is not set).
INFO:main:Starting Selkies (WebSocket Mode) with settings: {'_setting_definitions': [{'name': 'audio_enabled', 'type': 'bool', 'default': True, 'help': 'Enable server-to-client audio streaming.'}, {'name': 'microphone_enabled', 'type': 'bool', 'default': True, 'help': 'Enable client-to-server microphone forwarding.'}, {'name': 'gamepad_enabled', 'type': 'bool', 'default': True, 'help': 'Enable gamepad support.'}, {'name': 'clipboard_enabled', 'type': 'bool', 'default': True, 'help': 'Enable clipboard synchronization.'}, {'name': 'clipboard_in_enabled', 'type': 'bool', 'default': True, 'help': 'Enable client-to-server clipboard synchronization.'}, {'name': 'clipboard_out_enabled', 'type': 'bool', 'default': True, 'help': 'Enable server-to-client clipboard synchronization.'}, {'name': 'command_enabled', 'type': 'bool', 'default': True, 'help': 'Enable parsing of command websocket messages.'}, {'name': 'file_transfers', 'type': 'list', 'default': 'upload,download', 'meta': {'allowed': ['upload', 'download']}, 'help': 'Allowed file transfer directions (comma-separated: "upload,download"). Set to "" or "none" to disable.'}, {'name': 'framerate', 'type': 'range', 'default': '8-120', 'meta': {'default_value': 60}, 'help': 'Allowed framerate range (e.g., "8-165") or a fixed value (e.g., "60").'}, {'name': 'audio_bitrate', 'type': 'enum', 'default': '320000', 'meta': {'allowed': ['64000', '128000', '192000', '256000', '320000']}, 'help': 'The default audio bitrate.'}, {'name': 'is_manual_resolution_mode', 'type': 'bool', 'default': False, 'help': 'Lock the resolution to the manual width/height values.'}, {'name': 'manual_width', 'type': 'int', 'default': 0, 'help': 'Lock width to a fixed value. Setting this forces manual resolution mode.'}, {'name': 'manual_height', 'type': 'int', 'default': 0, 'help': 'Lock height to a fixed value. Setting this forces manual resolution mode.'}, {'name': 'scaling_dpi', 'type': 'enum', 'default': '96', 'meta': {'allowed': ['96', '120', '144', '168', '192', '216', '240', '264', '288']}, 'help': 'The default DPI for UI scaling.'}, {'name': 'enable_binary_clipboard', 'type': 'bool', 'default': False, 'help': 'Allow binary data (e.g., images) on the clipboard.'}, {'name': 'use_browser_cursors', 'type': 'bool', 'default': False, 'help': 'Use browser CSS cursors instead of rendering to canvas.'}, {'name': 'use_css_scaling', 'type': 'bool', 'default': False, 'help': 'HiDPI when false, if true a lower resolution is sent from the client and the canvas is stretched.'}, {'name': 'ui_title', 'type': 'str', 'default': 'Selkies', 'help': 'Title in top left corner of sidebar.'}, {'name': 'ui_show_logo', 'type': 'bool', 'default': True, 'help': 'Show the Selkies logo in the sidebar.'}, {'name': 'ui_show_core_buttons', 'type': 'bool', 'default': True, 'help': 'Show the core components buttons display, audio, microphone, and gamepad.'}, {'name': 'ui_show_sidebar', 'type': 'bool', 'default': True, 'help': 'Show the main sidebar UI.'}, {'name': 'ui_sidebar_show_video_settings', 'type': 'bool', 'default': True, 'help': 'Show the video settings section in the sidebar.'}, {'name': 'ui_sidebar_show_screen_settings', 'type': 'bool', 'default': True, 'help': 'Show the screen settings section in the sidebar.'}, {'name': 'ui_sidebar_show_audio_settings', 'type': 'bool', 'default': True, 'help': 'Show the audio settings section in the sidebar.'}, {'name': 'ui_sidebar_show_stats', 'type': 'bool', 'default': True, 'help': 'Show the stats section in the sidebar.'}, {'name': 'ui_sidebar_show_clipboard', 'type': 'bool', 'default': True, 'help': 'Show the clipboard section in the sidebar.'}, {'name': 'ui_sidebar_show_files', 'type': 'bool', 'default': True, 'help': 'Show the file transfer section in the sidebar.'}, {'name': 'ui_sidebar_show_apps', 'type': 'bool', 'default': True, 'help': 'Show the applications section in the sidebar.'}, {'name': 'ui_sidebar_show_sharing', 'type': 'bool', 'default': True, 'help': 'Show the sharing section in the sidebar.'}, {'name': 'ui_sidebar_show_gamepads', 'type': 'bool', 'default': True, 'help': 'Show the gamepads section in the sidebar.'}, {'name': 'ui_sidebar_show_fullscreen', 'type': 'bool', 'default': True, 'help': 'Show the fullscreen button in the sidebar.'}, {'name': 'ui_sidebar_show_gaming_mode', 'type': 'bool', 'default': True, 'help': 'Show the gaming mode button in the sidebar.'}, {'name': 'ui_sidebar_show_trackpad', 'type': 'bool', 'default': True, 'help': 'Show the virtual trackpad button in the sidebar.'}, {'name': 'ui_sidebar_show_keyboard_button', 'type': 'bool', 'default': True, 'help': 'Show the on-screen keyboard button in the display area.'}, {'name': 'ui_sidebar_show_soft_buttons', 'type': 'bool', 'default': True, 'help': 'Show the soft buttons section in the sidebar.'}, {'name': 'enable_sharing', 'type': 'bool', 'default': True, 'help': 'Master toggle for all sharing features.'}, {'name': 'enable_collab', 'type': 'bool', 'default': True, 'help': 'Enable collaborative (read-write) sharing link.'}, {'name': 'enable_shared', 'type': 'bool', 'default': True, 'help': 'Enable view-only sharing links.'}, {'name': 'enable_player2', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 2.'}, {'name': 'enable_player3', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 3.'}, {'name': 'enable_player4', 'type': 'bool', 'default': True, 'help': 'Enable sharing link for gamepad player 4.'}, {'name': 'debug', 'type': 'bool', 'default': False, 'help': 'Enable debug logging.'}, {'name': 'mode', 'type': 'str', 'default': 'websockets', 'help': "Specify the mode: 'webrtc' or 'websockets'; defaults to websockets"}, {'name': 'enable_dual_mode', 'type': 'bool', 'default': False, 'help': 'Enable switching Streaming modes from UI'}, {'name': 'audio_device_name', 'type': 'str', 'default': 'output.monitor', 'help': 'Audio device name for pcmflux capture.'}, {'name': 'encoder', 'type': 'enum', 'default': 'x264enc', 'meta': {'allowed': ['x264enc', 'x264enc-striped', 'jpeg']}, 'help': 'The default video encoder.'}, {'name': 'h264_crf', 'type': 'range', 'default': '5-50', 'meta': {'default_value': 25}, 'help': 'Allowed H.264 CRF range (e.g., "5-50") or a fixed value.'}, {'name': 'jpeg_quality', 'type': 'range', 'default': '1-100', 'meta': {'default_value': 40}, 'help': 'Allowed JPEG quality range (e.g., "1-100") or a fixed value.'}, {'name': 'h264_fullcolor', 'type': 'bool', 'default': False, 'help': 'Enable H.264 full color range for pixelflux encoders.'}, {'name': 'h264_streaming_mode', 'type': 'bool', 'default': False, 'help': 'Enable H.264 streaming mode for pixelflux encoders.'}, {'name': 'use_cpu', 'type': 'bool', 'default': False, 'help': 'Force CPU-based encoding for pixelflux.'}, {'name': 'use_paint_over_quality', 'type': 'bool', 'default': True, 'help': 'Enable high-quality paint-over for static scenes.'}, {'name': 'paint_over_jpeg_quality', 'type': 'range', 'default': '1-100', 'meta': {'default_value': 90}, 'help': 'Allowed JPEG paint-over quality range or a fixed value.'}, {'name': 'h264_paintover_crf', 'type': 'range', 'default': '5-50', 'meta': {'default_value': 18}, 'help': 'Allowed H.264 paint-over CRF range or a fixed value.'}, {'name': 'h264_paintover_burst_frames', 'type': 'range', 'default': '1-30', 'meta': {'default_value': 5}, 'help': 'Allowed H.264 paint-over burst frames range or a fixed value.'}, {'name': 'second_screen', 'type': 'bool', 'default': True, 'help': 'Enable support for a second monitor/display.'}, {'name': 'port', 'type': 'int', 'default': 8081, 'env_var': 'CUSTOM_WS_PORT', 'help': 'Port for the data websocket server.'}, {'name': 'control_port', 'type': 'int', 'default': 8083, 'help': 'Port for the internal control plane API.'}, {'name': 'master_token', 'type': 'str', 'default': '', 'help': 'Master token to enable secure mode and protect the control plane API.'}, {'name': 'dri_node', 'type': 'str', 'default': '', 'env_var': 'DRI_NODE', 'help': 'Path to the DRI render node for VA-API.'}, {'name': 'watermark_path', 'type': 'str', 'default': '', 'env_var': 'WATERMARK_PNG', 'help': 'Absolute path to the watermark PNG file.'}, {'name': 'watermark_location', 'type': 'int', 'default': -1, 'env_var': 'WATERMARK_LOCATION', 'help': 'Watermark location enum (0-6).'}, {'name': 'wayland_socket_index', 'type': 'int', 'default': 0, 'help': 'Index for the Wayland command socket (e.g. 0 for wayland-0).'}], 'audio_enabled': (True, False), 'microphone_enabled': (True, False), 'gamepad_enabled': (False, False), 'clipboard_enabled': (True, False), 'clipboard_in_enabled': (True, False), 'clipboard_out_enabled': (True, False), 'command_enabled': (True, False), 'file_transfers': ['upload', 'download'], 'framerate': (8, 120), 'audio_bitrate': '320000', 'is_manual_resolution_mode': (False, False), 'manual_width': 0, 'manual_height': 0, 'scaling_dpi': '96', 'enable_binary_clipboard': (False, False), 'use_browser_cursors': (False, False), 'use_css_scaling': (False, False), 'ui_title': 'Selkies', 'ui_show_logo': (True, False), 'ui_show_core_buttons': (True, False), 'ui_show_sidebar': (True, False), 'ui_sidebar_show_video_settings': (True, False), 'ui_sidebar_show_screen_settings': (True, False), 'ui_sidebar_show_audio_settings': (True, False), 'ui_sidebar_show_stats': (True, False), 'ui_sidebar_show_clipboard': (True, False), 'ui_sidebar_show_files': (True, False), 'ui_sidebar_show_apps': (True, False), 'ui_sidebar_show_sharing': (True, False), 'ui_sidebar_show_gamepads': (False, False), 'ui_sidebar_show_fullscreen': (True, False), 'ui_sidebar_show_gaming_mode': (True, False), 'ui_sidebar_show_trackpad': (True, False), 'ui_sidebar_show_keyboard_button': (True, False), 'ui_sidebar_show_soft_buttons': (True, False), 'enable_sharing': (True, False), 'enable_collab': (True, False), 'enable_shared': (True, False), 'enable_player2': (False, False), 'enable_player3': (False, False), 'enable_player4': (True, False), 'debug': (False, False), 'mode': 'websockets', 'enable_dual_mode': (False, False), 'audio_device_name': 'output.monitor', 'encoder': 'x264enc', 'h264_crf': (5, 50), 'jpeg_quality': (1, 100), 'h264_fullcolor': (False, False), 'h264_streaming_mode': (False, False), 'use_cpu': (False, False), 'use_paint_over_quality': (True, False), 'paint_over_jpeg_quality': (1, 100), 'h264_paintover_crf': (5, 50), 'h264_paintover_burst_frames': (1, 30), 'second_screen': (False, False), 'port': 8082, 'control_port': 8083, 'master_token': '', 'dri_node': '/dev/dri/renderD128', 'watermark_path': '', 'watermark_location': -1, 'wayland_socket_index': 0}
INFO:main:Initial Encoder: x264enc, Framerate: 60
INFO:main:SelkiesStreamingApp initialized: encoder=x264enc, display=1024x768
INFO:webrtc_input:kwin_wayland detected: enabling Clipboard-Input fallback for Unicode.
INFO:webrtc_input:Wayland input injection initialized.
INFO:webrtc_input:Built Wayland scancode map with 491 keys.
INFO:main:All main components initialized. Running server...
INFO:webrtc_input:Initializing 4 persistent gamepad instances...
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js0): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js0.sock, EVDEV socket: /tmp/selkies_event1000.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 0 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js0.sock, EVDEV: /tmp/selkies_event1000.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js1): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js1.sock, EVDEV socket: /tmp/selkies_event1001.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 1 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js1.sock, EVDEV: /tmp/selkies_event1001.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js2): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js2.sock, EVDEV socket: /tmp/selkies_event1002.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 2 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js2.sock, EVDEV: /tmp/selkies_event1002.sock).
INFO:root:Packed js_config payload for 'Microsoft X-Box 360 pad' (js3): len=1360 bytes. Name='Microsoft X-Box 360 pad', Vendor=0x045e, Product=0x028e, Version=0x0100, Reported Buttons=11 (Array capacity: 512), Reported Axes=8 (Array capacity: 64)
INFO:selkies_gamepad:Gamepad configured. JS socket: /tmp/selkies_js3.sock, EVDEV socket: /tmp/selkies_event1003.sock. Using fixed config: Microsoft X-Box 360 pad
INFO:webrtc_input:Initialized and started persistent gamepad instance for index 3 (Name: 'Microsoft X-Box 360 pad', JS: /tmp/selkies_js3.sock, EVDEV: /tmp/selkies_event1003.sock).
INFO:webrtc_input:Clipboard monitor running (binary mode: False)
INFO:webrtc_input:Wayland mode: Cursor monitor disabled (handled by compositor callback).
INFO:selkies_gamepad:Gamepad /tmp/selkies_js0.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js0.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js1.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js1.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js2.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js2.sock
INFO:selkies_gamepad:Gamepad /tmp/selkies_js3.sock: Event processor started.
INFO:selkies_gamepad:JS interposer server listening on /tmp/selkies_js3.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1000.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1001.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1002.sock
INFO:selkies_gamepad:EVDEV interposer server listening on /tmp/selkies_event1003.sock
INFO:data_websocket:Data WebSocket Server listening on port 8082
kbuildsycoca6 running...
INFO:data_websocket:Legacy client ('127.0.0.1', 34644) connected. Role: controller, Slot: None
INFO:data_websocket:Data WebSocket connected from ('127.0.0.1', 34644)
INFO:data_websocket:Attempting to establish PulseAudio connection...
INFO:data_websocket:PulseAudio connection established.
INFO:data_websocket:Registering new client for display: primary
INFO:data_websocket:Applying and sanitizing client settings for 'primary' (initial=True)
INFO:data_websocket:DPI changed from None to 96. Applying system-level change.
INFO:data_websocket:Initial setup or dimensional change detected for 'primary'. Performing full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Calculating new extended desktop layout from ALL clients...
INFO:data_websocket:Layout calculated: Total Size=1264x802. Layouts: {'primary': {'x': 0, 'y': 0, 'w': 1264, 'h': 802}}
INFO:data_websocket:Starting separate capture instances for each ACTIVE display region...
INFO:data_websocket:Client 'primary' is active. Starting its capture.
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
INFO:data_websocket:Video chunk sender started for display 'primary'.
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:data_websocket:Broadcasting primary stream resolution to all clients: {"type": "stream_resolution", "width": 1264, "height": 802}
INFO:data_websocket:Broadcasting display config update: DISPLAY_CONFIG_UPDATE,{"type": "display_config_update", "displays": ["primary"]}
INFO:data_websocket:Display reconfiguration finished successfully.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Initial client settings message processed by ws_handler.
INFO:data_websocket:Initial setup: Primary client connected, audio not active, attempting start.
INFO:data_websocket:Starting pcmflux audio pipeline...
INFO:data_websocket:pcmflux settings: device='output.monitor', bitrate=320000, channels=2
INFO:data_websocket:pcmflux audio capture started successfully.
INFO:data_websocket:pcmflux audio chunk broadcasting task started.
INFO:data_websocket:Received START_AUDIO command from client for server-to-client audio.
INFO:data_websocket:START_AUDIO: pcmflux audio pipeline already active.
INFO:data_websocket:Received redundant resize request for primary (1264x802). No action taken.
INFO:data_websocket:Received STOP_VIDEO for 'primary'. Stopping stream.
INFO:data_websocket:Stopping all streams for display 'primary'...
INFO:data_websocket:Successfully stopped all streams for display 'primary'.
INFO:data_websocket:Video chunk sender for 'primary' cancelled.
INFO:data_websocket:Video chunk sender for 'primary' finished.
INFO:data_websocket:Received START_VIDEO for 'primary'. Starting its stream.
INFO:data_websocket:Found existing layout for 'primary'. Starting capture with: {'x': 0, 'y': 0, 'w': 1264, 'h': 802}
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
INFO:data_websocket:Video chunk sender started for display 'primary'.
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:webrtc_input:Set clipboard content, length: 244
INFO:webrtc_input:Clipboard changed. Sending content (text/plain)
INFO:data_websocket:Cleaning up Data WS handler for ('127.0.0.1', 34644) (Display ID: primary)...
INFO:data_websocket:Client for 'primary' disconnected. Removing and triggering full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Stopping all existing capture and backpressure tasks...
INFO:data_websocket:All capture instances, senders, and backpressure tasks stopped.
WARNING:data_websocket:No display clients connected. Video pipelines remain stopped.
INFO:data_websocket:Video chunk sender for 'primary' cancelled.
INFO:data_websocket:Video chunk sender for 'primary' finished.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Last client (('127.0.0.1', 34644)) disconnected. All pipelines should have been stopped by reconfigure_displays.
INFO:main:Initiating unified pipeline shutdown...
WARNING:data_websocket:Reconfiguration already in progress. Ignoring concurrent request.
INFO:data_websocket:Stopping pcmflux audio pipeline...
INFO:data_websocket:pcmflux audio chunk broadcasting task cancelled.
INFO:data_websocket:pcmflux audio chunk broadcasting task finished.
INFO:data_websocket:pcmflux audio pipeline stopped.
INFO:main:Unified pipeline shutdown complete.
INFO:data_websocket:Data WS handler for ('127.0.0.1', 34644) finished all cleanup.
INFO:data_websocket:Stats sender: WS connection closed.
INFO:data_websocket:Legacy client ('127.0.0.1', 40118) connected. Role: controller, Slot: None
INFO:data_websocket:Data WebSocket connected from ('127.0.0.1', 40118)
INFO:data_websocket:Sending last known cursor to new client ('127.0.0.1', 40118)
INFO:data_websocket:Attempting to establish PulseAudio connection...
INFO:data_websocket:PulseAudio connection established.
INFO:data_websocket:Registering new client for display: primary
INFO:data_websocket:Applying and sanitizing client settings for 'primary' (initial=True)
INFO:data_websocket:DPI changed from None to 96. Applying system-level change.
INFO:data_websocket:Initial setup or dimensional change detected for 'primary'. Performing full display reconfiguration.
INFO:data_websocket:Starting display reconfiguration...
INFO:data_websocket:Calculating new extended desktop layout from ALL clients...
INFO:data_websocket:Layout calculated: Total Size=1264x802. Layouts: {'primary': {'x': 0, 'y': 0, 'w': 1264, 'h': 802}}
INFO:data_websocket:Starting separate capture instances for each ACTIVE display region...
INFO:data_websocket:Client 'primary' is active. Starting its capture.
INFO:data_websocket:Preparing to start capture for display='primary': Res=1264x802, Offset=0x0
INFO:main:Parsed DRI node '/dev/dri/renderD128' to index 0.
INFO:data_websocket:Registered Wayland cursor callback for 'primary'
INFO:data_websocket:Video chunk sender started for display 'primary'.
INFO:data_websocket:SUCCESS: Capture started for 'primary'.
INFO:data_websocket:Broadcasting primary stream resolution to all clients: {"type": "stream_resolution", "width": 1264, "height": 802}
INFO:data_websocket:Broadcasting display config update: DISPLAY_CONFIG_UPDATE,{"type": "display_config_update", "displays": ["primary"]}
INFO:data_websocket:Display reconfiguration finished successfully.
INFO:data_websocket:Reconfiguration process complete (state unlocked).
INFO:data_websocket:Initial client settings message processed by ws_handler.
INFO:data_websocket:Initial setup: Primary client connected, audio not active, attempting start.
INFO:data_websocket:Starting pcmflux audio pipeline...
INFO:data_websocket:pcmflux settings: device='output.monitor', bitrate=320000, channels=2
INFO:data_websocket:pcmflux audio capture started successfully.
INFO:data_websocket:pcmflux audio chunk broadcasting task started.
INFO:data_websocket:Received START_AUDIO command from client for server-to-client audio.
INFO:data_websocket:START_AUDIO: pcmflux audio pipeline already active.
INFO:data_websocket:Received redundant resize request for primary (1264x802). No action taken.

[github-actions]

Thanks for opening your first issue here! Be sure to follow the relevant issue templates, or risk having this issue marked as invalid.

[thelamer]

Can't you just hit ctrl again to unstick it ?

Referencing #387

In general I am not touching input for a while, things are relatively stable and I do not want to play whack a mole as there are so many different languages and input methods. I have translated every facet of the application and tired my best to universally translate keysyms from the browser client into scancodes for wayland input.

I cannot do this alone people need to step up and help out if they want their input working perfectly:

https://github.com/selkies-project/selkies/blob/main/src/selkies/input_handler.py
https://github.com/selkies-project/selkies/blob/main/addons/selkies-web-core/lib/input.js

[dionorgua]

I can unstick it in X11 sessions (without PIXELFLUX_WAYLAND ) by pressing same key again., but it doesn't work in wayland sessions.

Thanks for sharing actual file names. I'll try it do something myself :)

NOTE: for me it looks different than #387 but surely related. I think that for me issue is not keyboard translation itself, but because browser gets disconnected with ctrl pressed (that Ctrl+W shortcut).

I was able to reproduce it by just holding Ctrl and killing chrome in background using sleep 10; killall chromium. After restart Ctrl is pressed forever

[thelamer]

Every one of our containers is an RDE and this is intentional, the bar is very low to test and certify changes while input is scoped to these two files basically. Changes are welcome if they work and don't break other stuff.

git clone https://github.com/selkies-project/selkies.git
cd selkies

docker run --rm -it \
 -p 3001:3001 \
 -e PUID=1000 \
 -e PGID=1000 \
 -e DEV_MODE=selkies-dashboard \
 -v $(pwd):/config/src \
 linuxserver/chromium bash

Note for client changes to hot reload you need to write to https://github.com/selkies-project/selkies/blob/main/addons/selkies-web-core/selkies-core.js after changing input.js.

[dionorgua]

@thelamer this one fixes it for me:
selkies-project/selkies#232

I have not tested it with full KDE image but I can confirm that suggested by you linuxserver/chromium image has same issue and it gets fixed with that PR merged