add TBS_LUCID_H7_OEM

[bkleiner]

This pull requests adds support for TBS_LUCID_H7_OEM

• Samples received
• Flash firmware
• Calibrate
• Orientation matches
• Gyro working
• Accel working
• Voltage correct
• Current correct
• Baro working
• Mag I2C Bus
• Additional I2C2 Buses (Airspeed/other accessories)
• UART2
• UART3
• UART4
• UART6
• UART7
• UART8
• Analog Camera working
• Video Out working
• OSD working
• LEDs working
• Buzzer working
• Motor outputs
• DShot support on m1-4
• Servo outputs
• Blackbox
• PINIO1
• PINIO2
• PINIO3

[qodo-code-review]

Qodo reviews are paused for this user.

Troubleshooting steps vary by plan Learn more →

On a Teams plan?
Reviews resume once this user has a paid seat and their Git account is linked in Qodo.
Link Git account →

Using GitHub Enterprise Server, GitLab Self-Managed, or Bitbucket Data Center?
These require an Enterprise plan - Contact us
Contact us →

[github-actions]

Branch Targeting Suggestion

You've targeted the master branch with this PR. Please consider if a version branch might be more appropriate:

• maintenance-9.x - If your change is backward-compatible and won't create compatibility issues between INAV firmware and Configurator 9.x versions. This will allow your PR to be included in the next 9.x release.

• maintenance-10.x - If your change introduces compatibility requirements between firmware and configurator that would break 9.x compatibility. This is for PRs which will be included in INAV 10.x

If master is the correct target for this change, no action is needed.

---

This is an automated suggestion to help route contributions to the appropriate branch.

[github-actions]

Test firmware build ready — commit 9dcda99

Download firmware for PR #11636

239 targets built. Find your board's .hex file by name on that page (e.g. MATEKF405SE.hex). Files are individually downloadable — no GitHub login required.

Development build for testing only. Use Full Chip Erase when flashing.

[daijoubu]

Same with this one, if it has a canbus port can you add the pin definitions please? It would save me from trying to work it out from the ArduPilot target.

[bkleiner]

Same with this one, if it has a canbus port can you add the pin definitions please? It would save me from trying to work it out from the ArduPilot target.

...lets have this conversation once please :)