From 3de5bac2b348b533f46336ac3bd9f9979b91c52b Mon Sep 17 00:00:00 2001 From: Justin Bunton Date: Fri, 15 May 2026 05:34:34 +0000 Subject: [PATCH] Updated 1 file via CloudCannon. --- docs/products/ESPHome-Starter-Kit/first-steps.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/products/ESPHome-Starter-Kit/first-steps.md b/docs/products/ESPHome-Starter-Kit/first-steps.md index 681d864bd..73b0f5c36 100755 --- a/docs/products/ESPHome-Starter-Kit/first-steps.md +++ b/docs/products/ESPHome-Starter-Kit/first-steps.md @@ -25,13 +25,13 @@ Each module is connected to the panel by small breakaway tabs. Follow the steps !!! success "Take it slow" - Bend the panel a little at a time rather than forcing it. The PCB is rigid but the components on the modules can be damaged by sharp impacts or twisting. + Bend the panel gradually, not all at once. The PCB is sturdy, but the components on the modules prefer a gentle snap. 1. Hold the panel flat on a table with one hand on the module you want to remove. 2. Gently flex the panel along the tab line until the tab snaps cleanly.